Upgrade EN.txt

The following is the procedure for upgrading the firmware of the nextbeat x-1000 device.
Thanks to this procedure the device will gain new functions (including automatic synchronization of tracks) and will be more stable and faster to work with.

The whole procedure takes about 30 minutes. Make sure that the device is connected to a power source that is safe from accidental shutdown.
Please do all the operations according to the order given.
Skip any step, select the wrong file or interrupt the update operation - they can permanently damage the device.

Level 1

1. Connect the disconnected nextbeat to the connected computer using a USB cable,
2. Enable nextbeat, the memory card should be in the middle,
3. After detecting the nextbeat through the operating system, access its tab and delete all files from it,
4. Load the file from the First Phase catalog (ALLF_01-09-03-03-01-02.nbu),
5. Turn off the nextbeat,
6. Unplug the USB cable from nextbeat
7. Enable nextbeat. The device will display the upgrade-day message on the screen.
8. Press the button on the device responsible for the PLAY / PAUSE functions (located under the button with the green letter B)
9. The installation process takes about 10 minutes and finally displays a message that it has been terminated and you can turn off the device.
10. Turn off the device.
11. Plug the USB cable into the computer nextnexat.
12. Enable nextbeat.
13. After the computer detects the device, delete all files from the memory card.
14. Turn off the nextbeat.


Stage 2

1. Connect the disconnected nextbeat to the connected computer using a USB cable,
2. Enable nextbeat, the memory card should be in the middle,
3. After detecting the nextbeat through the operating system, access its tab and delete all files from it,
4. Load the file from the Druga Phase catalog (ALLF_01-10-04-04-01-02.nbu) on the card,
5. Turn off the nextbeat,
6. Unplug the USB cable from nextbeat
7. Enable nextbeat. The device will display the upgrade-day message on the screen.
8. Press the button on the device responsible for the PLAY / PAUSE functions (located under the button with the green letter B)
9. The installation process takes about 10 minutes and finally displays a message that it has been terminated and you can turn off the device.
10. Turn off the device.
11. Plug the USB cable into the computer nextnexat.
12. Enable nextbeat.
13. After the computer detects the device, delete all files from the memory card.
14. Turn off the nextbeat.


Stage 3

1. Connect the disconnected nextbeat to the connected computer using a USB cable,
2. Enable nextbeat, the memory card should be in the middle,
3. After detecting the nextbeat through the operating system, access its tab and delete all files from it,
4. Load the file from the Third Phase catalog (ALLF_01-11-04-06-02-03.nbu),
5. Turn off the nextbeat,
6. Unplug the USB cable from nextbeat
7. Enable nextbeat. The device will display the upgrade-day message on the screen.
8. Press the button on the device responsible for the PLAY / PAUSE functions (located under the button with the green letter B)
9. The installation process takes about 10 minutes and finally displays a message that it has been terminated and you can turn off the device.
10. Turn off the device.
11. Plug the USB cable into the computer nextnexat.
12. Enable nextbeat.
13. After the computer detects the device, delete all files from the memory card.
14. Turn off the nextbeat.