README.DOC

 ******************************************************************************
 *              Genius LAN GE2500III Card IBM LAN Server driver               *
 ******************************************************************************


   A. Diskette Introduction :
   ==========================

   This sub-directory contains the following structures:

   LANSRVR
      ｳ
      ｳ
      ﾃﾄﾄ DOS         : Contains IBM LAN SERVER driver for DOS.
      ｳ
      ﾀﾄﾄ OS2         : Contains IBM LAN SERVER driver for OS/2.


   B. Installation Guildline:
   ==========================

      FOR DOS:
      --------

        1.  Insert the GE2500III driver diskette into floppy drive.

        2.  In the directory the IBM LAN Server program located, press
            "INSTALL" to install the driver for GE2500III Ethernet Adapter.

        3.  In the dialog box, select "Network card" and press ENTER
            to continue.

        4.  In the dialog box, select "Change driver for network card."
            and press ENTER to continue.

        5.  In the dialog box, select "Network card not shown in list
            below ..." and press ENTER to continiue.

        6.  To specify the drive and path to GE2500III driver diskette

            (e.g.,"A:\LANSRVR\DOS").

        7.  The "Genius LAN GE2500III Ethernet Adapter" is shown in the
            listed dialog box.

        8.  If you need to change the configuration, select "Edit settings
            for network card driver." to change configuration such as IOBASE
            or INTERRUPT number.

        9.  After you installed completely, in DOS prompt copy the driver,
            PCIND.DOS, to the hard disk from the directory the driver
            located.


      FOR OS/2:
      ---------

        1.  Insert the GE2500III driver diskette into floppy drive.

        2.  In IBM LAN Server, select or run the MPTS (Multi Protocol
            Transport Service) program. refer to the IBM LAN Adapter and
            Protocol Support Configuration Guide for more information on
            this utility and for more details on how to install additional
            adapters and device drivers.

        3.  From the IBM MPTS dialog box, choose the "INSTALL" button to
            install a GE2500III ethernet card for IBM LAN Server environment.
            If the GE2500III ethernet card has already been installed, go to
            setp 6 below to continue.

        4.  Specify the drive and path (e.g., "LANSRVR") to the GE2500III
            driver diskette (e.g., "A:\LANSRVR\OS2").

        5.  After installing/copying the appropriate NIF files from GE2500III
            driver diskette, IBM MPTS dialog box will appear again.

        6.  From the IBM MPTS dialog box, select the "Configure".

        7.  In the Configuration dialog box, choose the "Configure LAN
            transports"(default) option and select "Continue".

        8.  When the Configure Workstation dialog box is displayed, remove
            the current configuration from the Current Configuration list
            box.

        9.  Choose the "Genius LAN GE2500III Ethernet Adapter" from the Network
            Adapters list box, by highlight the entry. Then choose "Add" the
            GE2500III ethernet card to the Current Configuration list box.

        10. Highlight the appropriate protocols in the Protocols list box.
            Then choose "Add" to add them to Current Configuration list box.

        11. Choose "OK" to finish installation.
 ======================================================================