1541_Maintenance_Guide.pdf

(2912 KB) Pobierz
i rs?
S R5 X 0."**
0 U,F
1541 MAINTENANCE GUIDE
$6.95
096-1301-1
1
1541
Maintenance Guide
=== —H
I
1272190352.002.png
PI
J I
PUBLISHED BY
PELTIER INDUSTRIES,INC
735 N. Doris
Wichita, Kansas 67212
Copyright 1984 by MICHAEL G. PELTIER
All rights reserved. Printed in the United States of America. No
part of this publication may be reproduced, stored in a retrieval
system or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the
prior permission of the publisher.
The information in this manual has been reviewed and is believed
to be entirely correct. No responsibility, however, is assumed
for any personal or property damage incurred from the use of this
manual. The material in this manual is for information purposes
only, and is subject to change without notice.
Commodore Business Machines, Inc., and the author of this manual
advise that any attempt to repair the VIC-1541 or the 1541 disk
drives during the warranty period will void the factory warranty.
VIC-1541, VIC-20 and COMMODORE 64 are registered trademarks of Commodore
Business Machines.
1272190352.003.png
WARNING:
HIGH VOLTAGE EQUIPMENT
THIS EQUIPMENT CONTAINS CERTAIN CIRCUITS AND/OR COMPONENTS OF
EXTREMELY HIGH VOLTAGE POTENTIALS. CAPABLE OF CAUSING SERIOUS
BODILY INJURY OR DEATH. WHEN PERFORMING ANY OF THE PROCEDURES
CONTAINED IN THIS MANUAL, HEED ALL APPLICARLE SAFETY PRECAUTIONS.
RESCUE OF SHOCK VICTIMS
1. DO NOT ATTEMPT TO PULL OR GRAB THE VICTIM
2. IF POSSIBLE, TURN OFF THE ELECTRICAL POWER.
3. IF YOU CANNOT TURN OFF ELECTRICAL POWER, PUSH, PULL OR LIFT
THE VICTIM TO SAFETY USING A WOODEN POLE, A ROPE OR SOME
OTHER DRY INSULATING MATERIAL.
FIRST AID
1. AS SOON AS VICTIM IS FREE OF CONTACT WITH SOURCE OF
ELECTRICAL SHOCK, MOVE VICTIM A SHORT DISTANCE AWAY FROM
SHOCK HAZARD.
2. SEND FOR DOCTOR AND/OR AMBULANCE.
3. KEEP VICTIM WARM. QUIET AND FLAT ON HIS/HER BACK.
4. IF BREATHING HAS STOPPED , ADMINISTER ARTIFICIAL
RESUSCITATION. STOP ALL SERIOUS BLEEDING.
1272190352.004.png
1272190352.005.png
TABLE OF CONTENTS
Para.
Title
Page
No.
FRONT MATTER
Title Page
Copyright Page
Warning Page
Table of Contents
Section 1-INTRODUCTION
1-1
General
1-1
1-2
VIC-1541 vs. 1541
1-1
1-3
Warnings, Cautions and Notes
1-1
Section 2-CALIBRATION
2-1
General
2-1
2-2
Equipment Required
2-1
2-3
Preparation for Calibration
2-1
2-4
Calibration
2-2
2-5
Head Alignment
2-4
2-5-1
General
2-4
2-5-2
Equipment Required
2-5
2-5-3
Preparation for Mechanical Alignment
2-5
2-5-4
Head Alignment
2-5
2-6
Mechanical Alignment of Track #1 Stop
2-8
2-6-1
General
2-8
2-6-2
Preparation for Mechanical Alignment
2-8
2-6-3
Mechanical Alignment
2-8
Section 3-TROUBLESHOOTING
3-1
General
3-1
3-2
TROUBLESHOOTING-PART 1
3-2
Section 4-SCHEMATICS AND PARTS LAYOUT
4-1
General
4-1
APPENDICES
Appendix A Video Detector Fabrication
A-l
Appendix B Timing Strobe Fabrication
B-l
Page i
1272190352.001.png
Zgłoś jeśli naruszono regulamin