01732.pdf

(45 KB) Pobierz

2500 SX/33

(250-1623)

Using ACU.EXE

Faxback Doc. # 1732

After copying ACU.EXE, you can run it from your startup diskette or

directory by typing acu and pressing ENTER. If you want to use a mouse with

ACU.EXE, be sure you have a mouse driver loaded.

Use the up and down arrow keys to select the desired video mode. For each

video mode listed, use the mouse or the left and right arrow keys to select

a refresh rate. To preview a mode, press ENTER or click on the preview

button with the mouse. To return from the preview mode, press the ESC key or

click the left mouse button.

After making your selections, use the mouse or the arrow keys to select EXIT

TO DOS. Then, click the left mouse button or press ENTER.

The three options are displayed. You can:

° Return to the program by typing "C" to Cancel

° Exit without updating by typing "N" for No, or

° Exit and save settings by typing "Y" for Yes.

┌──────────────────────────┐

│Copying

the VGA Utilities:│

└──────────────────────────┘

To use the VGA utilities, copy them to your startup diskette or hard drive

directory. For example, if your operating system is in the root directory or

a hard drive (Drive C), insert the Utilities & VGA Drivers diskette into

Drive A and type the following commands to copy the files to C:\.

Press ENTER after each command.

copy a:\acu.exe c:\

copy a:\avga2cfg.com c:\

copy a:\setmode.exe c:\

(jej-05/11/94)